GSM Shield Box Setup & USB Driver 2023 Download

If you are looking for the latest setup and USB driver for the GSM Shield box then you have visited the right place. When you purchase a SIM900 shield, you will need to go through a series of steps in order to get it configured and running.

These steps include powering up the device, configuration, and programming. These steps can be easily done by following the instructions included in the package. If you encounter any trouble while setting up your shield, follow the instructions in this article.


You can use the GSM Shield Box for Windows for the configuration of the GSM network. It is easy to use. It is made up of several parts and has a GPRS library. It has a toggle switch to enable or disable the external power supply. It also has a notch for the SIM card that can lock the SIM into the board.

Firstly, you will need a SIM card from a GSM network provider. This SIM card represents your contract with the communications provider. Make sure you use one that supports the GSM coverage of your area and has a roaming agreement with a GSM carrier. The GSM shield for Windows supports two or three GSM SIM cards.

Power up

In order to power up your GSM Shield Box setup, you need to connect the shield to an external 5V power supply. There is a toggle switch next to the DC jack, which you can use to turn the power on or off. Then, press the power key for two seconds to enable the shield. The LEDs on the shield will blink every 800 ms until it finds a network. After that, you can switch on the shield using the software provided.

The GSM Shield Box setup for Windows is easy to use, thanks to the GPRS library and GPRS functions. The setup is very easy and doesn’t require any technical knowledge or programming skills. To get started, simply download the GSM Shield Box setup for Windows and follow the instructions.


The GSM Shield Box Setup for Windows software can be used to configure a GSM network. This software provides an easy-to-use GPRS library for the PC. It can also change the baud rate of the shield. For example, if the current baud rate is 115200, you can change it to 19200.

The GSM Shield Box Setup For Windows application is designed for Windows users and can be run from a PC equipped with an Ethernet port. The program’s GUI features AT commands to control the baud rate of the GSM shield. You can also send and receive AT commands.

Download Section

Model: GSM Shield Box

File Type: Setup

Current Version: Latest

File Size: 175.2 MB

The GSM Shield Box allows you to service Qualcomm, Mediatek, and Spreadtrum-based phones. It also allows you to perform a reset, write firmware, erase NVRAM, and restore privacy code. This software also lets you create custom loaders. However, you must have a compatible phone to use this software.


The first step in programming a GSM shield box is to connect the SIM card. A metal bracket secures the SIM to the board. Then, connect a 5V power supply to the GSM_TX pin. You can connect this pin to an Arduino Uno, but you may want to use a different power supply.

The GSM shield box comes with two buttons: a reset button tied to the Arduino IDE, and a power button tied to the modem. Pressing these buttons will turn on the modem. Older versions of the shield required you to manually turn the modem on, but newer models will turn it on automatically.

Once the shield is connected, you can program it to answer calls. It can be used to turn on lights, fans, or sprinklers when it receives an SMS message. The SIM800L GSM module outputs a comma-separated message, the sender’s name, and the time the message was sent.

Movilforum SIM card

The GSM shield is a hardware device that connects to GSM networks, but will not operate on 3G or 4G networks. The device supports phone calls, SMS messages, and data connections. It requires a power supply of between 700 mA and 1,000 mA.

Using the GSM library, you can create and run any application that needs to use a SIM. Using the GSM PIN class in the GSM library, you can send and receive AT commands to your device.

A SIM card is an essential part of the GSM shield setup. It represents the contract you’ve entered into with your communications provider. Make sure that your SIM provider offers GSM coverage in the area where you’re living. You should also check whether your SIM provider has roaming agreements with GSM carriers in your area.

Leave a Comment